維護銅關公的方法

在我國人民的心目當中關公是驍勇講義氣，忠正不二的形象，很是受人們喜歡，所以現在的我們會看到關公銅像被擺放在各種場所，尤其是室外的關公如果仔細觀察，還會發現上面有綠銹，因此鑄銅關公的維護也是使用過程中很重要的一個環節，主要注意以下五個方面的問題。

In the eyes of our people, Guan Gong is a brave, loyal and loyal image, which is very popular. So now we will see Guan Gong's bronze statue placed in various places, especially outdoor Guan Gong. If you carefully observe it, you will find green rust on it. Therefore, the maintenance of the cast copper Guan Gong is also an important link in the use process, focusing on the following five aspects.

1.鑄銅關公的擺放環境需求保持枯燥，無塵埃和空氣污染物。溫度在18℃-24℃之間，相對濕度在40%-50%之間。

1. The placing environment of cast copper Guan Gong needs to be kept dry and free of dust and air pollutants. The temperature is between 18 ℃ and 24 ℃, and the relative humidity is between 40% and 50%.

2.鑄銅關公需求防止有害的化學物質，如酸、油脂、氯化物等。搬動銅工藝品時要戴上棉絲手套，不要用手直接接觸，防止被手上的汗水腐蝕。不要用油膩的紙或盒子包裝。

2. Copper casting officials need to prevent harmful chemicals, such as acid, grease, chloride, etc. When moving copper handicrafts, you should wear cotton gloves and do not touch them directly with your hands to prevent them from being corroded by sweat on your hands. Do not use greasy paper or boxes for packaging.

3.鑄銅關公表面的塵埃要用潔凈柔軟的布擦拭潔凈，需求特別護理的部分(容易破碎和軟弱)要用軟刷刷掉或許用吸塵器吸走或吹掉。

3. The dust on the surface of the cast copper gate shall be wiped with a clean and soft cloth, and the parts that need special care (easy to be broken and weak) shall be brushed off with a soft brush or vacuumed or blown off with a vacuum cleaner.

4.為防止鑄銅關公被機械損壞，應防止相互磕碰，不要堆疊和堆疊，并應留意保持精致和容易損壞的銅工藝品。

4. In order to prevent the cast copper Guan Gong from being damaged by machinery, it is necessary to prevent collision with each other, do not stack and stack, and pay attention to keeping delicate and easily damaged copper handicrafts.

5.鑄銅關公放置時間過長后，根據放置的環境或多或少會出現一些板滯現象。這個時候可以用棉絹布來回擦拭。

5. After the cast copper Guan Gong has been placed for a long time, there will be some stagnation more or less according to the placing environment. At this time, you can use cotton cloth to wipe back and forth.